Sysdrain®

One system, many possible applications

The ideal percolation system for houses, garages, areas in use, agricultural buildings, sports facilities, carports, summer-houses, conservatories and many other applications.

The demand for on-site percolation of rainwater and thus for relieving the burden on the public drainage system is arising ever more frequently. Sysdrain® , the plastic percolation shaft, represents the ideal solution.
Given its low own weight and its modular construction, it is extremely easy to transport. Standard connections facilitate simple and economical installation.

Drainage/percolation

Roof drainage on new buildings and as replacement drains. For example: residential housing, weekend residences, log cabins, garages, carports, conservatories, agricultural buildings.

Drainage of areas in use

E.g. parking areas, entrances to courtyards, children's play areas, sports facilities.

Inspection shaft

To house the installation or as a pump well for a garden pond or on a building site.

Cellar drain

Used in conjunction with the inlet module, Sysdrain® is a cost-favourable and convenient solution. Comprehensive installations for draining these surfaces can be dispensed with. Simply install Sysdrain® pre-assembled in the ditch, fill in, concrete in - job done!

Planting trough

To protect the trunk e.g. during building work, as a plant container or to restrict root growth.

Cisterns

Using a hosepipe, Sysdrain® transforms into a small cistern (3 sizes for approx. 170, 340 and 510 litre capacity are available).
Extraction using an electrical or hand-driven pump.
Note: cisterns (concrete or plastic) require an overflow - Sysdrain® is especially suitable for this!

Sysdrain® can be stacked

As a rule, up to three elements can be stacked. In individual instances, 4 or 5 elements have already been successfully installed on top of one another.

One system, many advantages

• Modular construction
• Extremely simple assembly using a tongue and groove locking system
• Lightweight (approx. 11 kg), making for ease of transport
• No need for heavy machinery when installing
• Manufactured from pure-grade HD-PE recycled material, which can be recycled again.
• For the professional and the private home-owner
• Also suitable for large facilities
• Standard connections (Ø approx. 100 mm), thus can easily be integrated with existing peripherals.
• Relieves the burden on the public drains system
• Percolation over the entire upper surface of the shaft
• Can be customised to suit particular requirements (stackable or arranged as a battery)
• Greatly reduced time required for installation
• Protective of the environment, because it facilitates local water percolation.
• Can be combined with all standard trade inlet and drainage pipes.

Inlet module

For direct water feed from above (e.g. for drainage of areas in use) or to connect a inlet pipe, Ø 150 mm.
Larger items trapped in the water are filtered out in the integrated coarse sieve. The cover of the inlet module and the coarse filter are removable.

Shaft element

The pre-manufactured holes on the side walls can easily be broken through using a hammer.
Sysdrain® is rapidly ready for use, due to the tongue-and-groove construction system.
The small-diameter holes (18 per side element) assist with large-area percolation.
The water exit direction can thus be defined specific to use.
The large holes (3 per side element) form the connection points for standard pipes (Ø 100 mm).
To increase capacity, two or three shaft modules can be installed either as a stack or arranged as a battery.

Cover

The cover can withstand heavy loads. It is held in position with 3 screws on top of the prepared shaft. If a pond pump is installed (water reservoir), the cover can be cut open at the point marked.

Base

When used as a water reservoir, the base is inserted and serves to protect the hosepipe.
It is pressed in from above into the assembled ring of the shaft and then sealed.
When used as a small composter, the base serves as a lid.

Filter fleece

The filer fleece prevents ingress of sand and other materials trapped in the water into the percolation shaft.
It is simply laid around the percolation shaft and attached to the outside using the anchorage points provided. The filter fleece is non-perishable and permanently water-permeable.

Hosepipe

Sysdrain can be converted to a water reservoir using a hosepipe. 3 sizes (approx. 170, 340 and 510 litres) are available for different capacity requirements.
The hosepipe is inserted into the shaft and attached on the upper edge with the cover fitted.

Adapter

Using the adapter, you can attach a wide variety of standard trade shaft coverings (to be walked upon, internal diameter approx. 600 mm) and their accessories.
As a base ring, the adapter serves to stabilise the shaft on the shaft floor.